U.S. Taxpayers Are Gouged on Mass Transit Costs

massmotorist

Active Member
Joined
Mar 27, 2012
Messages
201
Reaction score
0
All of this is true of highway construction as well.

http://www.bloomberg.com/news/2012-08-26/u-s-taxpayers-are-gouged-on-mass-transit-costs.html

U.S. Taxpayers Are Gouged on Mass Transit Costs

By Stephen Smith Aug 26, 2012 6:30 PM ET

If the first segment of Manhattan’s Second Avenue subway opens on schedule in 2016, New Yorkers will be reminded that it was once “the line that time forgot” -- a project more than 75 years in the making, with no end in sight. It should be remembered for another failing as well: It will be one of the most expensive subways in the world.

Tunneling in any dense urban environment is an expensive proposition, but the $5 billion price tag for just the first two miles of the Second Avenue subway cannot be explained by engineering difficulties. The segment runs mainly beneath a single broad avenue, unimpeded by rivers, super-tall skyscraper foundations or other subway lines.

American taxpayers will shell out many times what their counterparts in developed cities in Europe and Asia would pay. In the case of the Second Avenue line and other new rail infrastructure in New York City, they may have to pay five times as much.

Amtrak is just as bad. Its $151 billion master plan for basic high-speed rail service in the Northeast corridor is more expensive than Japan’s planned magnetic levitating train line between Tokyo and Osaka, most of which is to be buried deep underground, with tunnels through the Japan Alps and beneath its densest cities.

The numbers for California’s proposed high-speed rail system are similarly shocking.

California Bloat

The French rail operator SNCF told the California High- Speed Rail Authority that it could cut $30 billion off the project’s $68 billion estimated price tag. San Francisco can barely build underground light rail for the price that Tokyo pays for high-capacity subways. Los Angeles’s planned subway to the sea will be a bit cheaper, but is still very expensive considering the area’s lack of density.

The budgets for other types of urban public-works projects can be just as shocking. Who can forget Boston’s Big Dig, the $24 billion highway boondoggle? But mass-transit networks stand to lose most from out-of-control infrastructure costs.

A huge part of the problem is that agencies can’t keep their private contractors in check. Starved of funds and expertise for in-house planning, officials contract out the project management and early design concepts to private companies that have little incentive to keep costs down and quality up. And even when they know better, agencies are often forced by legislation, courts and politicians to make decisions that they know aren’t in the public interest.

Comparing American transit-construction practices with those abroad yields a number of lessons. Spain has the most dynamic tunneling industry in the world and the lowest costs. In 2003, Metro de Madrid Chief Executive Officer Manuel Melis Maynar wrote a list describing the practices he used to design the system’s latest expansion. The don’t-do list, unfortunately, reads like a winning U.S. transit-construction bingo card.

Perhaps the most ostentatious violation of Melis’s manual of best practices is expensive architecture in stations. “Design should be focused on the needs of the users,” he wrote, “rather than on architectural beauty or exotic materials, and never on the name of the architect.”

American politicians have different priorities. The Port Authority of New York and New Jersey is spending $3.8 billion on a single subway station at the World Trade Center designed by Santiago Calatrava, a Spanish architect known for his costly projects. If New York could build subways at the prices that Paris and Tokyo pay, $3.8 billion would be enough to build the entire Second Avenue subway, from Harlem to the Financial District.

Spain’s Model

Melis also warned against “consultants who consultant with consultants and advisers who advise advisers,” something American planners would do well to learn. He said he didn’t hire any “large firm of consulting engineers” as general project managers for his Metro de Madrid expansions, and that designers weren’t allowed to interfere with, or bid for, their own construction contracts.

Not so in the U.S. Parsons Brinckerhoff, perhaps the biggest name in the nation’s transit construction industry, is both the lead-design contractor and project manager for California’s planned high-speed rail line, and the company stands a good chance of winning construction contracts for its own designs.

As if that conflict of interest wasn’t bad enough, the California High-Speed Rail Authority’s new CEO, Jeff Morales, arrived at the agency after a stint as senior vice present at Parsons Brinckerhoff, where he worked on the authority’s business plan.

Parsons Brinckerhoff, like all the other multinational contractors and construction companies that win bloated contracts in the U.S., can do good work. Its rail projects for Hong Kong’s Mass Transit Railway were built at a reasonable cost, and its participation in Turkey’s Marmaray rail tunnel across the Bosporus in Istanbul shows that it can deliver affordable results in forbidding terrain. But absent the right incentives and oversight, even the best private companies will resort to rent seeking.

Larry Littlefield, who has worked in logistics and as a budget analyst at New York City Transit, also suggests the U.S. legal system is an obstacle to designing and building affordable infrastructure. (The U.K. and India share a common-law legal heritage with the U.S. that is heavy on judicial review, and they also have trouble controlling costs.)

New York government agencies are saddled by procurement rules dating back generations, Littlefield says, when corruption in infrastructure projects was endemic. Reformers demanded objective and easily policeable standards, which often meant lowest-price bidding rules. Bidders compete mostly on price, not quality.

Speed Matters

In Madrid, on the other hand, cost was given only a 30 percent weight when picking designers and builders, according to Melis. Speed was weighted at 20 percent. Melis praised quick execution as necessary for an efficient, affordable project. (Compare this with multigenerational projects, such as California’s high-speed rail and New York’s Second Avenue subway.) The remaining 50 percent was determined by the technical merits of proposals and the staff’s subjective considerations.

Littlefield also argues that judges in New York routinely side with contractors in disputes with the Metropolitan Transportation Authority. “In the private sector, if you rob your customer, you will suffer a hit to your reputation and possible losses in the courts,” he said in an interview. “Not so if you rob an agency like the MTA. Then it’s all rights and no responsibilities.”

The MTA must continue to award contracts to the lowest- price bidder, and without the ability to hold bad contractors accountable, Littlefield said, the agency turns to “writing longer and longer and longer contracts, expressly prohibiting every way it has been ripped off in the past.” The byzantine contracts that come out of this process drive entrants away, limiting competition and pushing up costs.

Littlefield holds out hope, however, that transit agencies are capable of building with reasonable costs and timelines -- at least when they have to. “Remember how fast and how cheap they rebuilt the 1 train after 9/11? That’s what they’re capable of. But it just doesn’t happen otherwise.”
 
Lets see why it costs more , all of these are very easy to fix and the FRA is the reason for them.

1. The Ridiculous Regulations for Weight increase costs by at least 50 Million
2. Buy America crap increases cost by 100 Million on some projects
3. For Freight lines , you need a 100 Million down payment thanks to the FRA
4. The Real Estate and Greed in some areas drives up costs....like in NYC
5. NIMBYS , one town is enough to jack up costs of the entire line
 
I saw this earlier, it's a good article. If only we could learn something from Spain. You know, they also built a massive highway tunnel project through Madrid -- 10 km of tunnel, in only 7 years, and ~$US 5 billion. And on top they created an actual riverfront park, not some dinky median strip. It's remarkable.

The FRA weight requirements are ridiculous of course, but it's not the only thing. The FRA has woefully inadequate restrictions on superelevation and cant deficiency which could stand to be modernized; this would make it possible to build sharper curves. And staffing requirements on Amtrak are through the roof. I was on the Regional today and the conductors were even joking about it themselves: "Oh, so we're one person short? That means we leave with 8 people instead of 9? Hah!"
 
All projects are like this though, not just rail. And correct me if I'm wrong, but the FRA's most egregious requirements largely increase the cost of rolling stock rather than infrastructure.

I think the biggest issue is we rely on consultants too much for management, planning, and oversight rather than having agencies with adequately- and competently-staffed civil servants. And assuming you have an agency with sufficient safeguards in place, less prescriptive contracts and more discretion would result in contractors working harder to serve and stay in the good graces of agencies doling out contracts, and less litigation. With sufficient discretion the agencies could simply threaten to blackball a contractor that did something unfair, but it would rarely if ever happen because the contractors would have a different attitude in the first place.

Off-topic, but giving regulatory agencies with the same sort of discretion (basically, being able to use the smell test to sniff out unfair or deceptive practices rather than having prescriptive rules) would make us much better off as well.
 
You're right about consultants and that general problem.

But the FRA rules do have an effect on infrastructure. FRA compliant trains are more damaging to track and have a more difficult time climbing grades. The overly conservative approach to cant deficiency and superelevation means more land has to be taken for wider curves. There's also a tendency to solve organizational problems with concrete. For example, why does Amtrak demand almost completely separate facilities from local commuter agencies, when they can get away with it? Why can't LIRR, MN and NJT learn to all play nice together and share resources? For example, the selected ARC alternative originally was to build a NJT-dedicated deep cavern station -- super expensive! -- and unusable by anyone else.

Perhaps even more egregious, look at what CAHSR plans for Milbrae station. The way is large enough for 6 tracks. They just built a $200 million new station to handle both the ill-fated BART extension* and Caltrain. BART has 3 tracks dedicated to its terminus, leaving only space for 3 for Caltrain/HSR. So the geniuses over there came up with the idea of building a single track HSR tunnel underneath a BART track. It'll probably cost at least a billion dollars. And all because BART doesn't want to give up a track that it doesn't really need (much higher frequency operations turn with only 2 tracks). It's ridiculous.

There's also the design compromises they are making to avoid >1% grades so that the tiny amount of heavy freight on the peninsula can continue to run unchanged -- at enormous expense.

And you could go off on the number of unnecessary viaducts and detours that add cost (and profits for the builders) to the project. But this does come back to your point about consultants doing the design.


*Speaking of bad projects! Let's build a wye that will forever annoy either commuters to Milbrae or riders to the airport.
 
Captial costs: Davis Bacon.

Operating Costs: unions that pay someone with a GED $120,000/year including benefits.
 
Captial costs: Davis Bacon.

Operating Costs: unions that pay someone with a GED $120,000/year including benefits.

Theres only a few that earn over 120k , but there not the ones with a GED , more like higher ups. The Most you can make 70k , which is the same for Freight Rail...which can go up to 140k after 10-15 years in the large companies.
 
Last edited:
You're right about consultants and that general problem.

But the FRA rules do have an effect on infrastructure. FRA compliant trains are more damaging to track and have a more difficult time climbing grades. The overly conservative approach to cant deficiency and superelevation means more land has to be taken for wider curves. There's also a tendency to solve organizational problems with concrete. For example, why does Amtrak demand almost completely separate facilities from local commuter agencies, when they can get away with it? Why can't LIRR, MN and NJT learn to all play nice together and share resources? For example, the selected ARC alternative originally was to build a NJT-dedicated deep cavern station -- super expensive! -- and unusable by anyone else.

Perhaps even more egregious, look at what CAHSR plans for Milbrae station. The way is large enough for 6 tracks. They just built a $200 million new station to handle both the ill-fated BART extension* and Caltrain. BART has 3 tracks dedicated to its terminus, leaving only space for 3 for Caltrain/HSR. So the geniuses over there came up with the idea of building a single track HSR tunnel underneath a BART track. It'll probably cost at least a billion dollars. And all because BART doesn't want to give up a track that it doesn't really need (much higher frequency operations turn with only 2 tracks). It's ridiculous.

There's also the design compromises they are making to avoid >1% grades so that the tiny amount of heavy freight on the peninsula can continue to run unchanged -- at enormous expense.

And you could go off on the number of unnecessary viaducts and detours that add cost (and profits for the builders) to the project. But this does come back to your point about consultants doing the design.


*Speaking of bad projects! Let's build a wye that will forever annoy either commuters to Milbrae or riders to the airport.

We all use different Power Sources , NJT uses 25kv Catenary , LIRR uses 3rd Rail Top contact , and MNRR uses 3rd Rail bottom contact.
 
We all use different Power Sources , NJT uses 25kv Catenary , LIRR uses 3rd Rail Top contact , and MNRR uses 3rd Rail bottom contact.

Technical issues that can be overcome given the will to do so. For example, Metro North already runs a train to NJ for Giants games.
 
Technical issues that can be overcome given the will to do so. For example, Metro North already runs a train to NJ for Giants games.

Thats not Metro North , thats NJT....which uses the Hell Gate to New Haven line and switch over the various overhead voltages...

[youtube]dQV7bWnf7H8[/youtube]
 
Sorry, got mixed up. Anyway, the point remains. These are barriers that can be overcome, if they weren't too busy fighting over turf. Just look at the whackiness that is Penn Station, where LIRR/NJT and Amtrak have completely separate and parallel facilities despite sharing the same tracks. Although, I take advantage of this usually by skipping down to the lower level and boarding Amtrak as soon as I learn the track number. ;)

MN may run to Penn Station when ESA is finished. Maybe NJT/MN should consider working together on regularly scheduled through-service. They already work together on the Port Jervis line.
 
Captial costs: Davis Bacon.

Operating Costs: unions that pay someone with a GED $120,000/year including benefits.

Surely, though, you can't say that Europeans have lower wages, less regulation, or less strong unionization than America does. I don't know if there's a corollary to Davis-Bacon there, but even without it I would bet the cost of hiring an employee for a public construction project would be as high or higher than in America.

Again - not defending Davis-Bacon or unions, but I don't think they're the reason that our construction costs so much are higher than Europe's.
 
Surely, though, you can't say that Europeans have lower wages, less regulation, or less strong unionization than America does. I don't know if there's a corollary to Davis-Bacon there, but even without it I would bet the cost of hiring an employee for a public construction project would be as high or higher than in America.

Again - not defending Davis-Bacon or unions, but I don't think they're the reason that our construction costs so much are higher than Europe's.

Let's not muddle the discussion with facts. Kahta likes to bash unions with hyperbole and anecdotes. It's cathartic for him for some reason.
 
Just look at the whackiness that is Penn Station, where LIRR/NJT and Amtrak have completely separate and parallel facilities despite sharing the same tracks.

In a station as busy as that one, doesn't it make sense to separate commuter passengers from long-distance ones, giving each group its own ticketing and waiting area?
 
What for? So you can have a cattle call 5 minutes before departure as everyone stampedes to the tiny escalator?

Check out what these guys deal with:

http://en.wikipedia.org/wiki/Zürich_Hauptbahnhof
http://en.wikipedia.org/wiki/Berlin_Central_Station

both serve about 350,000 passengers a day each.

They call it 30 minutes before departure , the station layout is the problem with NYP. Its so confusing and messy that everyone piles on at one station.. The Whole Station needs to be redone. Problems like a stampede do not happen at other stations like Newark Penn , Jamaica or Grand Central. Newark Penn is getting a new Southern Concourse to handle the Increased usage and platforms will be able to handle 22cars by 2016. The Light Rail Basement was upgraded to handle 100,000 a few years ago....along with the Bus bays....

New York Penn Station - 670,000+ all Modes
Grand Central Terminal - 580,000+ All Modes
Jamaica - 270,000+ All Modes
Newark Penn Station - 150,000+ All Modes
Hoboken Terminal - 78,000+ All Modes
 

Back
Top